- 30 days fit Guarantee
- Designed in Denmark
- All orders out of Europe is without Danish vat(25%)
- Send directly from our Danish stock
Contact our sales team on (+45) 61274857 or
firstname.lastname@example.org for further questions
ESAPI ballistic plates: S,M,L and XL in NIJ level 4
This is our ESAPI ballistic plates (Enhanced Small Arms Protective Inserts), which come in NIJ level 4, stand alone. The ballistic plate comes in 4 different sizes, and all are multi curved so they have the best possible comfort.
The ballistic plates are all made in Monolithic SIC ceramic, which means that the strike face side (the front of the plate) consists of 1 large piece of ceramic, giving you the lightest but also strongest ceramic plate for NIJ level 4.
In addition, this monolithic ceramic plate offers edge to edge ceramics, which means that the plate has a full ceramic surface where many “cheap” plates have a smaller ceramic front to save weight and make the plate look superior than it is.
Our Stand alone ESAPI (SA) comes in 5 different sizes:
- Small: 227*303 mm / 8.75"x11.75" - (2.4 kg/5.3 lbs)
- Medium: 246*323 mm / 9.5"x12.5" - (2.90 kg/6.4 lbs)
- Large: 265*342 mm / 10.25"x13.75" - (3.20 kg/7.05 lbs)
- X-large: 285*361 mm / 11"x14"
- (3.7 kg/8.16 lbs)
- Standard: 250*300 mm / 10"x12" (2.78kg/6.1 lbs)
ESAPI In conjunction with (ICW) NIJ IIIA soft armor:
- Small: 227*303 mm / 8.75"x11.75" - (2.27 kg/5.0 lbs)
- Medium: 246*323 mm / 9.5"x12.5" - (2.70 kg/5.95 lbs)
- Large: 265*342 mm / 10.25"x13.75" - (2.97 kg/6.55 lbs)
- X-large: 285*361 mm / 11"x14" - (3.40 kg/7.5 lbs)
An ESAPI ballistic plate is designed to perform well in extreme environments where it is either hot or very cold, making the ballistic ESAPI plate very popular amongst soldiers fighting in the middle-east.
Our ESAPI ballistic plate is designed to stop a single shot from 7.62x63 AP (.30-06 Springfield), which means this plate stops Armor piercing hits with a steel core. At the same time, this ESAPI plate will stop several hits from lower calibers, such as AK47, SS109/M855A1 and 7.62x51 NATO.
The backing of the ESAPI plate we have used our special Anti-Back Face Signature trauma liner, providing extra protection against the blunt force trauma, so you do not get injured from the depth of the bullet impact.
The ballistic ESAPI plate comes with a protective layer of foam all around the plate, so it is protected from impacts and can withstand daily use. Furthermore the ESAPI plate is heat sealed with a water resistant Cordura, which is protecting the ballistic properties from water, oil or similar liquids from damaging the plate.
The ESAPI plates stop the following threats:
7.62x51 NATO, M80 (NIJ level 3 0101.06)
7.62x39 MSC, AK47
5.56x45 Nato, SS109/M855
7.62x63 AP / .30-06 Springfield (NIJ level 4 0101.06)
- Tested to NIJ level IV
- Stand alone | Requires no soft armor
- 28 mm thickness (SA)
- 20 mm thickness (ICW)
- ESAPI cut
- Multi curved/3D curved
- Water resistant cordura fabric cover against oil and similar liquids
7 year warranty
If you need the bullet proof plate with other specifications, ICW (In conjunction with) or curves (single, multi-curve), this can be made on request. Please contact us on +45 61274857 or Jonas@protectiongroup.dk
Test report - NIJ level 4 against .30-06 Springfield – contact email@example.com for further information.